Todos los productos
  • Weree de Daniel
    ¡Ha sido la relación de negocio durante 3 años, gran socio para la aleación del cobalto del níquel!
  • Carolina Fasio
    Entrega puntual. Y la ayuda es buena y rápida.
Persona de Contactar Ahora : Allen Sun
Número de teléfono : +86 18112628895
WhatsApp : +8618112628895

High temperature Inconel 718 plus hardened nickel-base alloy

  • High temperature Inconel 718 plus hardened nickel-base alloy
Lugar de origen China
Nombre de la marca XUNSHI
Certificación ISO9001:2015
Número de modelo Inconel 718 más
Cantidad de orden mínima 200kg
Precio Negotiable
Detalles de empaquetado caja de la madera contrachapada
Tiempo de entrega 45-60 días
Condiciones de pago T/T
Capacidad de la fuente 5000Kg por mes
Datos del producto
Modelo Inconel 718Plus Nombre igual ATI 718Plus, Allvac 718Plus
Espec. AMS 5441, AMS 5442 Formas de Avialable lingote, billete, bloque, barra redonda forjada, formas y rectángulos laminados en caliente, barra,
Densidad los 8.25g/cm
Deja un mensaje
Descripción de producto

High temperature Inconel 718 plus hardened nickel-base alloy for Copper-extruded mold 

 

Inconel 718 Plus (UNSN 07818) is a new hardened nickel-base alloy, this alloy is designed to have excellent comprehensive mechanical properties, good heat processing and welding properties, and appropriate cost below 700°C . The launch of the 718plus alloy effectively fills the long-standing gap between the two most widely used High-temperature alloys Inconel 718 (650 °C) and Waspaloy (750 °C).

 

The Inconel 718 Plus was based on Inconel 718 to reduce the iron content by 18% to 10%, adding 9% cobalt and 1% tungsten, adjusting Al + Ti and Al/Ti, and appropriately increasing the niobium content, 718 Plus alloy overcomes the Insufficient requirements of the two alloy 718 and Waspaloy (GH4738),so that could be used and 700°C

 

718,718Plus,Waspaloy Chemical Composition comparison

element C Ni Cr Mo W Co Fe Nb Ti Al P B
718 0.025 Remain 18.10 2.80 - - 18.00 5.40 1.00 0.45 0.007 0.004
718 Plus 0.020 Remain 18.00 2.75 1.00 9.00 10.00 5.45 0.70 1.45 0.010 0.004
Waspaloy 0.035 Remain 19.40 4.25 - 13.25 - - 3.00 1.30 0.006 0.006

 

Application

These products have been typically used for parts requiring high resistance to creep and stress rupture up to 1400°F(760°C) and oxidation resistance up to 1800°F(982°C), but usage is not limited to such applications.

 

At present, the alloy The 718 Plus has been promoted and applied in several well-known aviation-engine companies, for plates, gates, fasteners, blades and so on.

The 718 Plus is also a commonly used material for copper extrusion mold.

 

Available forms

718Plus alloy is available in all product forms: ingot, billet, block, forged round bar, hot-rolled shapes and rectangles, bar, rod, wire, plate, sheet, strip, and castings.

 

High temperature Inconel 718 plus hardened nickel-base alloy 0

Etiquetas:

aleaciones resistentes a la corrosión

aleación de níquel del cromo

aleación endurecible de la edad

Productos recomendados